Inconel 600 Plates & Sheets

Inconel 600 Plates, Alloy 600 Sheets, Inconel UNS N06600 Plates, Inconel Alloy 600 Sheets, Inconel 600 slitting Plate, Inconel 600 Circle, ASME SB 168 Plate, JIS NCF 600 Plate, 600 Inconel Hot Rolled Plates Stockist in Mumbai, India.

ASTM B 168 Inconel 600 Shim Sheets, Inconel Werkstoff No 2.4816 Sheets, Inconel 600 Cold Rolled Plates, 600 Alloy Plate Importer, Inconel 600 Sheets trader in India.

MV Super Alloys offers an extensive collection of Alloy 600 Sheets, Plates and Sheets in different dimensions and sizes, where we as well offer the same at best possible rates. These Inconel 600 Sheets have outstanding corrosion by soaring-purity water, together with caustic corrosion. Our Inconel 600 Plates have suitable resistance to dry HCl and Cl2 gasses at reasonably high temperatures. The high content of nickel of this Inconel 600 Sheets offers excellent resistance to chloride stress corrosion cracking, where conventional machining practices used for iron constructed alloys may perhaps be used. Our Inconel 600 slitting Sheets has Exceptional Corrosion Resistance at Elevated Temperatures, which shows soaring levels of resistance to stress – corrosion cracking. These Inconel 600 Perforated Sheets (UNS N06600) present the needed grouping of good weldability and high strength under an extensive collection of temperatures. Our Alloy 600 Plates are often used for furnace components, chemical and food processing, nuclear engineering, for sparking electrodes and so on. These Alloy 600 Sheets provide resistance to a number of organic and inorganic compounds, alkaline solutions and chloride – ion stress – corrosion cracking as well. Our Alloy 600 slitting Sheets is virtually immune to chloride ion stress corrosion cracking and is also non – magnetic and resistant to a wide range of corrosive materials. Meanwhile, these Alloy 600 Perforated Sheets are as well being offered in different sizes and shapes to our customers.

Trader Of ASME SB168 Inconel 600 Sheets, 600 Inconel Plate Stockholder, 600 Inconel Polished Cold Drawn Plates, Inconel GOST МНЖМц 28-2,5-1,5 Strips Stockist, Stockist.

Inconel 600 Sheet, Plate & Plate Specifications
Specifications	ASTM / ASME SB 168
Size	1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm
Thickness	0.1mm to 12 mm Thk
Form	Sheets, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Blank (Circle), Ring (Flange)
Finish	Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Hardness	Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.

Types of Inconel 600 Sheets, Plates & Sheets

Inconel 600 Foils:

• Inconel 600 foils are thin, flexible sheets made from the nickel-chromium alloy Inconel 600. These foils are used in specialized applications requiring low thickness and high formability. Inconel 600 foils find use in industries such as aerospace, electrical components, and pharmaceutical packaging due to their excellent resistance to corrosion and high-temperature environments.

Inconel 600 Shim Sheet:

• Inconel 600 shim sheets are thin, flat sheets used for precise spacing and alignment in various applications. They are commonly used as washers or gaskets to adjust component tolerances. Inconel 600 shim sheets are used in industries where high corrosion resistance and thermal stability are essential, such as chemical processing, aerospace, and marine applications.

Inconel 600 Polished Plates:

• Inconel 600 polished plates are flat, smooth-surfaced plates made from the nickel-chromium alloy Inconel 600. These plates have undergone polishing to achieve a refined and lustrous appearance. Inconel 600 polished plates are used in decorative applications as well as in industries where a smooth surface is necessary for easy cleaning and hygiene.

Inconel 600 Hot Rolled Plates:

• Inconel 600 hot rolled plates are flat, rectangular plates of the alloy manufactured through a hot rolling process. Hot rolling involves heating the material and passing it through rollers to achieve the desired thickness and shape. These plates are commonly used in industrial applications, including chemical processing, marine environments, and heat exchangers.

Inconel 600 Cold Rolled Plates:

• Inconel 600 cold rolled plates are flat, smooth-surfaced plates that have been processed through cold rolling to enhance their strength and surface finish. Cold rolling involves passing the material through rollers at room temperature. Inconel 600 cold rolled plates are commonly used in industries requiring tight dimensional tolerances and excellent surface quality.

Inconel 600 Sheets:

• Inconel 600 sheets are flat, rectangular metal plates made from the nickel-chromium alloy Inconel 600. These sheets offer excellent resistance to corrosion and high thermal conductivity. They are commonly used in various industries, including chemical processing, electronics, and marine applications.

Inconel 600 Strips:

• Inconel 600 strips are narrow, long pieces of the alloy used in applications that require precise dimensions and high resistance to corrosion and heat. These strips are commonly used in electrical and electronic components, as well as in various sealing and gasket applications.

Inconel 600 Circle:

• Inconel 600 circles are round, flat pieces of the alloy used in various industries, including aerospace, chemical processing, and petrochemical. These circles can be cut and shaped for specific purposes, such as flanges, fittings, and other components.

Inconel 600 Plate, Sheet & Plate Chemical Composition

Grade	C	Mn	Si	S	Cu	Fe	Ni	Cr
Inconel 600	0.15 max	1.00 max	0.50 max	0.015max	0.50 max	6.00 – 10.00	72.00 min	14.00 – 17.00

Alloy 600 Sheets, Plates & Sheets Mechanical Properties

Element	Density	Melting Point	Tensile Strength	Yield Strength (0.2%Offset)	Elongation
Inconel 600	8.47 g/cm3	1413 °C (2580 °F)	Psi – 95,000 , MPa – 655	Psi – 45,000 , MPa – 310	40 %

Equivalent Grades for 600 Inconel Sheets & Plates

STANDARD	WERKSTOFF NR.	UNS	JIS	BS	GOST	AFNOR	EN
Inconel 600	2.4816	N06600	NCF 600	NA 13	МНЖМц 28-2,5-1,5	NC15FE11M	NiCr15Fe

Inconel 600 Sheets, Plate & Sheets Application Industries

• Off-Shore Oil Drilling Companies
• Power Generation
• Petrochemicals
• Gas Processing
• Specialty Chemicals
• Pharmaceuticals
• Pharmaceutical Equipment
• Chemical Equipment
• Sea Water Equipment
• Heat Exchangers
• Condensers
• Pulp and Paper Industry

Alloy 600 Sheets, Plate & Sheets Test Certificates

We at MV Super Alloys provide Stockist TC (Test Certificate) in accordance with EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirements like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

ASTM / ASME SB 168 Inconel 600 Sheets, Plate & Sheets Value Added Services

Material Testing:
We at MV Super Alloys ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
•  Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and MacroTest
• Pitting Resistance Test
• Flaring Test
•  Intergranular Corrosion (IGC) Test

Inconel 600 Sheets, Plate & Sheets Packaging

We do care about the quality of our products even the little details are paid attention to. Each order is packaged according to the customer’ s standards including preparation for export such as wooden case, pallet or according to customer’s requirement All shipping documentation is provided for Inconel 600 Sheet, Plate and Plate delivery from mill to customer. Every assignment begins with a visit of our experienced sales representative who assesses the volume / weight of the belongings and briefs the client about the nature of packing required as well as various documentation formalities when moving from India.

Inconel 600 Sheets, Plate & Sheets Stockist Popular Searches

inconel 600 plates price india, inconel 600 sheet, alloy 600 sheets specification, inconel 600 sheets Importer in India, inconel UNS N06600 Sheets, inconel DIN 2.4851 sheets, 600 inconel plates, Sheets, inconel alloy 600 plates, 600 inconel alloy shim sheets, inconel 600 sheets price, inconel 600 plates Importer in India, inconel 600 chequered plate, 600 alloy Plate stockholder, inconel alloy 600 hot rolled plates traders, inconel 600 cold rolled sheet Trader, asme SB168 alloy 600 sheets Stockists.

Inconel 600 Sheets, Plate & Sheets Flanges Stockist

Noida, Madrid, Sharjah, Moscow, Hong Kong, Lagos, Montreal, Vadodara, Baroda, Bogota, Los Angeles, Petaling Jaya, New Delhi, Jeddah, Chennai, Kanpur, Edmonton, Istanbul, Thiruvananthapuram, Bhopal, Geoje-si, Calgary, Ulsan, Rio de Janeiro, Colombo, Cairo, Ludhiana, Indore, Thane, Dubai, Seoul, Santiago, Kuwait City, Dammam, Tehran, Busan, Rajkot, Nagpur, La Victoria, Bangkok, Hyderabad, Vung Tau, Granada, Lahore, Manama, Pimpri-Chinchwad, Jaipur, Ankara, Kuala Lumpur, Jamshedpur, Muscat, Nashik, Kolkata, Surat, Toronto, Howrah, Haryana, Pune, Ho Chi Minh City, Gimhae-si, Sydney, Perth, Melbourne, Houston, Milan, Dallas, Bengaluru, Algiers, Faridabad, Courbevoie, Navi Mumbai, Chandigarh, Jakarta, Abu Dhabi, Chiyoda, Secunderabad, London, Doha, Al Khobar, Brisbane, Ahmedabad, Karachi, Hanoi, Visakhapatnam, Singapore, Aberdeen, Coimbatore, Mumbai, Ranchi, Ernakulam, Caracas, Atyrau, New York, Gurgaon, Al Jubail, Mexico City, Ahvaz, Riyadh, Port-of-Spain.

Alloy 600 Sheets, Plate & Sheets Importer

Oman, Colombia, Portugal, Japan, Lithuania, Macau, Mongolia, Qatar, Ireland, Malaysia, Bangladesh, United Kingdom, Russia, Iran, Vietnam, Jordan, Yemen, South Africa, Singapore, Sri Lanka, Thailand, Bulgaria, Poland, Denmark, Nigeria, Gambia, Indonesia, Finland, Argentina, Chile, Spain, Peru, Kuwait, India, Saudi Arabia, Ghana, Philippines, Pakistan, Bahrain, Nigeria, Tibet, Libya, Venezuela, Gabon, Mexico, Puerto Rico, Algeria, Lebanon, Hong Kong, Kazakhstan, Brazil, Taiwan, Namibia, Australia, Belgium, Switzerland, Kenya, Romania, Ecuador, Slovakia, Zimbabwe, Morocco, United Arab Emirates, Germany, Bolivia, South Korea, Costa Rica, United States, Iraq, Greece, Trinidad & Tobago,Tunisia, Hungary, Israel, Turkey, Serbia, France, China, Norway, Afghanistan, Angola, Austria, Nepal, Italy, Bhutan, Czech Republic, Belarus, Sweden, Ukraine, Canada, Estonia, Azerbaijan, Mexico, Iran, Egypt, Netherlands, Poland, New Zealand, Chile, Croatia.

MV Super Alloys is your trusted partner for competitive quotations on Inconel 600. Contact us today for reliable service and quality products tailored to your needs.